Sliding Window / July 16, 2018 / Christabel Gosselin
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.
You will then need to install the panels into the rails. This can be hard because they are designed to not fall out. There may be Velcro strips you can install on the inside of the head rail to secure the windows. This should also let you slip in the panels. The valance returns attach to joiners but you may have to trip excess fabric. Woven wooden valances come with an aluminium L joint in the corner that inserts into the panel. The last step is to install the cords which move the panels along the track.
This type of window is just normal for some cleaners but what if you cant hire someone to do it for you? How do you clean it? Cleaning sliding windows is almost the same as cleaning an ordinary window. The only difference is how you remove them and clean it. Here are the steps that can help you. Prepare All the Needed Materials. Having all the materials readily accessible can save time and effort. You wont be wasting any time getting the materials in every part of the house.