Sliding Window / July 10, 2018 / Guillaume Roussel
Remove The Windows. You can easily remove the windows by sliding it open past the lift blocks and then placing your hands on either side of the window and lifting it out of its track. You can then remove the window towards you. Do the same with the other window and place them in a safe area. Proceed With The Washing. Wash them using a window cleaning solution and a nonlint cloth. Make sure to thoroughly clean the glass and remove any stains that you will find. Start from the upper left corner of your window glass and proceed downward using an Sshaped motion for wiping the window.
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.
You will have to choose a window with an electrical socket nearby in order to connect the air conditioner unitproperly. Remove any furniture or obstacles near the window which could impede air flow. You must thoroughly check the window sill to see if it will act as a stable base for air conditioner unit. You will have to replace it if it is cracked or corrupt before you proceed with installation of the unit. Now install the metal brackets use to support the AC at a level which is set for it. These brackets need to be nailed at the center.