Sliding Window / July 27, 2018 / Tearlach DuLin
Remove The Windows. You can easily remove the windows by sliding it open past the lift blocks and then placing your hands on either side of the window and lifting it out of its track. You can then remove the window towards you. Do the same with the other window and place them in a safe area. Proceed With The Washing. Wash them using a window cleaning solution and a nonlint cloth. Make sure to thoroughly clean the glass and remove any stains that you will find. Start from the upper left corner of your window glass and proceed downward using an Sshaped motion for wiping the window.
At first you will be having a hard time removing and placing the windows back in place. You need to learn how to work on them which later on can be easier. Cleaning these kinds of windows is not that easy especially if you are doing it alone. You need to develop certain skills to be able to perfectly finish the cleaning. Sliding panels are a great alternative to window blinds and horizontal window doors. They have a softer look than glass and can also be great accents in an Asian themed decor. Sliding panels have that special ability to be both wall and window at the same time. They filter light and provide privacy at the same time.
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.