Sliding Window / July 27, 2018 / Tearlach DuLin
Sliding window locks are often called vent locks as they allow the window to be locked slightly open for ventilation. The recommended gap is 100mm but never have more than 150mm. The theory is that if a head can get through a window a person can squeeze through. The venting position is not as secure as when the window is shut and locked. Therefore you should only leave your windows locked open you are at home.
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.
When one buys or rents a home a renovation of the house is sometimes called for and you might need to choose window types from the vast repertoire of available choices. A number of aspects need to be considered while planning a replacement of old windows or while choosing windows for your new home. The most important factors to keep in mind while choosing the window types are: ventilation beauty safety energy efficiency the environment and of course the cost. The most commonly used window types are casement and sliding windows.