Awning Windows / August 2, 2018 / Olympia Doucet
You will then need to install the panels into the rails. This can be hard because they are designed to not fall out. There may be Velcro strips you can install on the inside of the head rail to secure the windows. This should also let you slip in the panels. The valance returns attach to joiners but you may have to trip excess fabric. Woven wooden valances come with an aluminium L joint in the corner that inserts into the panel. The last step is to install the cords which move the panels along the track.
Next you need to install the head rail. Just like the lower track the pivot brackets must be a few inches from the wall. Sometimes you may need more than one track to cover a room. This also allows the window panels to be stacked upon each other. If you want to add an additional valance to the mix make sure you use one that is deigned for that window panel. Otherwise it will not fit correctly.
To install sliding window locks you need the following tools: Sliding windows can be lifted to varying degrees within their track. If you are using the venting position it is a good idea to fit something in the track to stop the window from being lifted. Small blocks of wood or plastic or just a screw can be used. If fitted correctly this can make the window a lot more secure especially when locking the window in the open position.