Awning Windows / August 4, 2018 / Tearlach DuLin
To install sliding window locks you need the following tools: Sliding windows can be lifted to varying degrees within their track. If you are using the venting position it is a good idea to fit something in the track to stop the window from being lifted. Small blocks of wood or plastic or just a screw can be used. If fitted correctly this can make the window a lot more secure especially when locking the window in the open position.
People usually think that the air conditioner installation needs some great expertise but in reality it is much easy more so in the case of sliding ACs. Precautions. The window ACs are bulky so you should lift them firmly but carefully without exerting any pressure on its cooling parts which could cause you injury. Materials and few tools you may need during the installation of air conditioner: A screwdriver A support arc A level Few Wood screws Some foam weather stripping.
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.