Sliding Window / July 16, 2018 / Christabel Gosselin
People usually think that the air conditioner installation needs some great expertise but in reality it is much easy more so in the case of sliding ACs. Precautions. The window ACs are bulky so you should lift them firmly but carefully without exerting any pressure on its cooling parts which could cause you injury. Materials and few tools you may need during the installation of air conditioner: A screwdriver A support arc A level Few Wood screws Some foam weather stripping.
Casement windows are attached vertically with hinges to one side on a wall. They usually open with a crank mechanism. A single window or a pair of windows can be fitted into a frame. They open all the way outward and are wide open from top to bottom and sidetoside. A sliding window is a window that slides along a track inside the window frame. The frame may consist of many tracks depending on the number of windows on the tracks. They open horizontally and give a hundred percent view of the outside.
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.