Sliding Window / July 14, 2018 / Tearlach DuLin
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.
If you are opting for the doors and windows then you can different kinds of frames for the same. This includes wooden framing aluminum framing and UPVC framing. The UPVC doors and windows are now preferred over the other two frames as the UPVC frames are more efficient. you can forget about heavy maintenance. The UPVC windows and doors require very little maintenance as compared to the other doors and windows and do not require regular paint jobs.
Next you need to install the head rail. Just like the lower track the pivot brackets must be a few inches from the wall. Sometimes you may need more than one track to cover a room. This also allows the window panels to be stacked upon each other. If you want to add an additional valance to the mix make sure you use one that is deigned for that window panel. Otherwise it will not fit correctly.