Sliding Window / July 24, 2018 / Marc Girard
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.
Always be sure to avoid abrasive cleaners such as cleansers and products containing bleach as they can affect the vinyl surface or the caulking around the window. Also avoid using a power washer or hard spraying hose as this too can damage the caulk. Besides occasional exterior cleaning the tracks and runners on your vinyl sliders should be checked every few weeks to make sure they are clear of debris. Vinyl sliding windows glide horizontally and open the full length of the window.
At first you will be having a hard time removing and placing the windows back in place. You need to learn how to work on them which later on can be easier. Cleaning these kinds of windows is not that easy especially if you are doing it alone. You need to develop certain skills to be able to perfectly finish the cleaning. Sliding panels are a great alternative to window blinds and horizontal window doors. They have a softer look than glass and can also be great accents in an Asian themed decor. Sliding panels have that special ability to be both wall and window at the same time. They filter light and provide privacy at the same time.