Sliding Window / July 22, 2018 / Christabel Gosselin
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.
Casement Windows. Open all the way outward hence allow maximum light and air. Energy efficient because they shut tight. Can be glazed to save energy. Easy to use as a simple crank mechanism is used. Disabled people can operate them easily. Cleaning is easy therefore ideal for installing behind sinks and countertops. Allows for quick and easy emergency escapes. Greater aesthetic customization lend themselves to a variety of designs colors and materials. Use mechanical parts that need maintenance
Remove The Windows. You can easily remove the windows by sliding it open past the lift blocks and then placing your hands on either side of the window and lifting it out of its track. You can then remove the window towards you. Do the same with the other window and place them in a safe area. Proceed With The Washing. Wash them using a window cleaning solution and a nonlint cloth. Make sure to thoroughly clean the glass and remove any stains that you will find. Start from the upper left corner of your window glass and proceed downward using an Sshaped motion for wiping the window.