Sliding Window / November 6, 2018 / Marc Girard.
To install sliding window locks you need the following tools: Sliding windows can be lifted to varying degrees within their track. If you are using the venting position it is a good idea to fit something in the track to stop the window from being lifted. Small blocks of wood or plastic or just a screw can be used. If fitted correctly this can make the window a lot more secure especially when locking the window in the open position.
To save on energy one can choose a doubleglazed window (which uses two panels of glass). The layer between the two glasses acts as an insulator to save the heat in the room. Depending on how much privacy and safety is required in the area where you live you may opt for fortified or screened windows. But above all its your budget that will have a final say on how your windows will look. There are benefits and drawbacks of each kind of window. Lets look at some of them:
Casement Windows. Open all the way outward hence allow maximum light and air. Energy efficient because they shut tight. Can be glazed to save energy. Easy to use as a simple crank mechanism is used. Disabled people can operate them easily. Cleaning is easy therefore ideal for installing behind sinks and countertops. Allows for quick and easy emergency escapes. Greater aesthetic customization lend themselves to a variety of designs colors and materials. Use mechanical parts that need maintenance
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.