Sliding Window / July 30, 2018 / Guillaume Roussel
You then use a dry non lint cloth or those absorbable cloth used in cleaning cars to dry your window. Dont forget to also clean the track where the window is and the area around it. Place Your Windows Back. After the cleaning and drying is done you need to put them back together. Put your windows back following a reverse order of how you removed them. You need to make sure that the sliding windows are reinstalled securely and there will be no chances of them being accidentally removed.
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.
To install sliding window locks you need the following tools: Sliding windows can be lifted to varying degrees within their track. If you are using the venting position it is a good idea to fit something in the track to stop the window from being lifted. Small blocks of wood or plastic or just a screw can be used. If fitted correctly this can make the window a lot more secure especially when locking the window in the open position.