Sliding Window / October 31, 2018 / Guillaume Roussel.
People usually think that the air conditioner installation needs some great expertise but in reality it is much easy more so in the case of sliding ACs. Precautions. The window ACs are bulky so you should lift them firmly but carefully without exerting any pressure on its cooling parts which could cause you injury. Materials and few tools you may need during the installation of air conditioner: A screwdriver A support arc A level Few Wood screws Some foam weather stripping.
Especially good for covering patio doors these window coverings preserve an outdoors look. Some interior decorators also use them as attractive room dividers. The dramatic size of these wall to wall floor to floor window coverings creates a striking image. To install these window coverings you need some kind of track to hold the window frame. Unlike wood blinds where the window and blinds are separate in sliding panels they are the same. Some have tracking on the top and bottom while some only have it on one side.
Next you need to install the head rail. Just like the lower track the pivot brackets must be a few inches from the wall. Sometimes you may need more than one track to cover a room. This also allows the window panels to be stacked upon each other. If you want to add an additional valance to the mix make sure you use one that is deigned for that window panel. Otherwise it will not fit correctly.
Sliding window locks are often called vent locks as they allow the window to be locked slightly open for ventilation. The recommended gap is 100mm but never have more than 150mm. The theory is that if a head can get through a window a person can squeeze through. The venting position is not as secure as when the window is shut and locked. Therefore you should only leave your windows locked open you are at home.