Sliding Window / July 28, 2018 / Burrell Lebel
You then use a dry non lint cloth or those absorbable cloth used in cleaning cars to dry your window. Dont forget to also clean the track where the window is and the area around it. Place Your Windows Back. After the cleaning and drying is done you need to put them back together. Put your windows back following a reverse order of how you removed them. You need to make sure that the sliding windows are reinstalled securely and there will be no chances of them being accidentally removed.
Always be sure to avoid abrasive cleaners such as cleansers and products containing bleach as they can affect the vinyl surface or the caulking around the window. Also avoid using a power washer or hard spraying hose as this too can damage the caulk. Besides occasional exterior cleaning the tracks and runners on your vinyl sliders should be checked every few weeks to make sure they are clear of debris. Vinyl sliding windows glide horizontally and open the full length of the window.
You will then need to install the panels into the rails. This can be hard because they are designed to not fall out. There may be Velcro strips you can install on the inside of the head rail to secure the windows. This should also let you slip in the panels. The valance returns attach to joiners but you may have to trip excess fabric. Woven wooden valances come with an aluminium L joint in the corner that inserts into the panel. The last step is to install the cords which move the panels along the track.