Sliding Window / July 16, 2018 / Guillaume Roussel
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.
Primarily it may be the environment that affects the choice of windows. A harsh environment calls for windows that are inside the house rather than exposed to the sun wind and temperature shifts whereas a mild environment allows the use of windows that are exposed to the outside. Ventilation is another important point to be considered while choosing windows. Windows fitted on opposite walls allow for cross ventilation and help keep the rooms cool.
To install sliding window locks you need the following tools: Sliding windows can be lifted to varying degrees within their track. If you are using the venting position it is a good idea to fit something in the track to stop the window from being lifted. Small blocks of wood or plastic or just a screw can be used. If fitted correctly this can make the window a lot more secure especially when locking the window in the open position.