Sliding Window / July 10, 2018 / Marc Girard
Next you need to install the head rail. Just like the lower track the pivot brackets must be a few inches from the wall. Sometimes you may need more than one track to cover a room. This also allows the window panels to be stacked upon each other. If you want to add an additional valance to the mix make sure you use one that is deigned for that window panel. Otherwise it will not fit correctly.
Especially good for covering patio doors these window coverings preserve an outdoors look. Some interior decorators also use them as attractive room dividers. The dramatic size of these wall to wall floor to floor window coverings creates a striking image. To install these window coverings you need some kind of track to hold the window frame. Unlike wood blinds where the window and blinds are separate in sliding panels they are the same. Some have tracking on the top and bottom while some only have it on one side.
You will have to choose a window with an electrical socket nearby in order to connect the air conditioner unitproperly. Remove any furniture or obstacles near the window which could impede air flow. You must thoroughly check the window sill to see if it will act as a stable base for air conditioner unit. You will have to replace it if it is cracked or corrupt before you proceed with installation of the unit. Now install the metal brackets use to support the AC at a level which is set for it. These brackets need to be nailed at the center.