Sliding Window / July 8, 2018 / Christabel Gosselin
Remove The Windows. You can easily remove the windows by sliding it open past the lift blocks and then placing your hands on either side of the window and lifting it out of its track. You can then remove the window towards you. Do the same with the other window and place them in a safe area. Proceed With The Washing. Wash them using a window cleaning solution and a nonlint cloth. Make sure to thoroughly clean the glass and remove any stains that you will find. Start from the upper left corner of your window glass and proceed downward using an Sshaped motion for wiping the window.
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.
People have now started opting for sliding door also and especially when they have a good patio and garden. It makes the home look spacious and helps you enjoy a beautiful view outside. In case you are at the patio then you can still know whats going inside your home. The sliding door can also be used inside your home as a partition or to convert two rooms into one. Many people use this kind of door to distinguish their dining room from the living room. When you throw a party you can open the door so that the guests can feel comfortable and dont feel crammed together.