Awning Windows / August 4, 2018 / Tearlach DuLin
Remove The Windows. You can easily remove the windows by sliding it open past the lift blocks and then placing your hands on either side of the window and lifting it out of its track. You can then remove the window towards you. Do the same with the other window and place them in a safe area. Proceed With The Washing. Wash them using a window cleaning solution and a nonlint cloth. Make sure to thoroughly clean the glass and remove any stains that you will find. Start from the upper left corner of your window glass and proceed downward using an Sshaped motion for wiping the window.
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.
When it comes to weather there again the UPVC sliding window and doors are better as they can deal with strong winds and rains easily. They can seal your home well so that you dont have to worry about water seepage or about noise pollution. When it comes to environment there again the UPVC doors and windows are better as they made from vinyl and manufacturing them requires very little energy. So if you wish to open up your living space then you can opt for the UPVC sliding doors and windows which can turn out to be the perfect answer.