Sliding Window / July 27, 2018 / Tearlach DuLin
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.
You will then need to install the panels into the rails. This can be hard because they are designed to not fall out. There may be Velcro strips you can install on the inside of the head rail to secure the windows. This should also let you slip in the panels. The valance returns attach to joiners but you may have to trip excess fabric. Woven wooden valances come with an aluminium L joint in the corner that inserts into the panel. The last step is to install the cords which move the panels along the track.
Regular lubrication is required for smooth operation. Are more damage prone because they are exposed to the outside environment. Screens are prone to damage as they need to be fitted on the inside. Sometimes two windows may come in each others way. More prone to misalignment. Sliding Windows : Allow for maximum light and air. Are inside the house hence less weather beaten. Energy efficient because they shut tight. Can be glazed to save energy. Simple sliding. Movement makes them disabledfriendly