Awning Windows / August 5, 2018 / Christabel Gosselin
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.
Many new sliding windows have key locking latches already installed. Some allow the window to be locked slightly open for ventilation. If your home has these window locks they are usually secure enough to keep your insurance company happy. If your home has only a simple nonlocking latch you should secure them with a keylocking sliding window lock or a window grill. Installing window locks yourself will cost AUD$15$20 per window. Having these locks supplied and installed by a locksmith will cost $40$50 per window.
You will then need to install the panels into the rails. This can be hard because they are designed to not fall out. There may be Velcro strips you can install on the inside of the head rail to secure the windows. This should also let you slip in the panels. The valance returns attach to joiners but you may have to trip excess fabric. Woven wooden valances come with an aluminium L joint in the corner that inserts into the panel. The last step is to install the cords which move the panels along the track.