Awning Windows / October 24, 2018 / Guillaume Roussel.
Remove The Windows. You can easily remove the windows by sliding it open past the lift blocks and then placing your hands on either side of the window and lifting it out of its track. You can then remove the window towards you. Do the same with the other window and place them in a safe area. Proceed With The Washing. Wash them using a window cleaning solution and a nonlint cloth. Make sure to thoroughly clean the glass and remove any stains that you will find. Start from the upper left corner of your window glass and proceed downward using an Sshaped motion for wiping the window.
Many new sliding windows have key locking latches already installed. Some allow the window to be locked slightly open for ventilation. If your home has these window locks they are usually secure enough to keep your insurance company happy. If your home has only a simple nonlocking latch you should secure them with a keylocking sliding window lock or a window grill. Installing window locks yourself will cost AUD$15$20 per window. Having these locks supplied and installed by a locksmith will cost $40$50 per window.
Regular lubrication is required for smooth operation. Are more damage prone because they are exposed to the outside environment. Screens are prone to damage as they need to be fitted on the inside. Sometimes two windows may come in each others way. More prone to misalignment. Sliding Windows : Allow for maximum light and air. Are inside the house hence less weather beaten. Energy efficient because they shut tight. Can be glazed to save energy. Simple sliding. Movement makes them disabledfriendly
Especially good for covering patio doors these window coverings preserve an outdoors look. Some interior decorators also use them as attractive room dividers. The dramatic size of these wall to wall floor to floor window coverings creates a striking image. To install these window coverings you need some kind of track to hold the window frame. Unlike wood blinds where the window and blinds are separate in sliding panels they are the same. Some have tracking on the top and bottom while some only have it on one side.