Awning Windows / August 5, 2018 / Christabel Gosselin
You will have to choose a window with an electrical socket nearby in order to connect the air conditioner unitproperly. Remove any furniture or obstacles near the window which could impede air flow. You must thoroughly check the window sill to see if it will act as a stable base for air conditioner unit. You will have to replace it if it is cracked or corrupt before you proceed with installation of the unit. Now install the metal brackets use to support the AC at a level which is set for it. These brackets need to be nailed at the center.
Remove The Windows. You can easily remove the windows by sliding it open past the lift blocks and then placing your hands on either side of the window and lifting it out of its track. You can then remove the window towards you. Do the same with the other window and place them in a safe area. Proceed With The Washing. Wash them using a window cleaning solution and a nonlint cloth. Make sure to thoroughly clean the glass and remove any stains that you will find. Start from the upper left corner of your window glass and proceed downward using an Sshaped motion for wiping the window.
Many new sliding windows have key locking latches already installed. Some allow the window to be locked slightly open for ventilation. If your home has these window locks they are usually secure enough to keep your insurance company happy. If your home has only a simple nonlocking latch you should secure them with a keylocking sliding window lock or a window grill. Installing window locks yourself will cost AUD$15$20 per window. Having these locks supplied and installed by a locksmith will cost $40$50 per window.