Awning Windows / August 5, 2018 / Christabel Gosselin
You will then need to install the panels into the rails. This can be hard because they are designed to not fall out. There may be Velcro strips you can install on the inside of the head rail to secure the windows. This should also let you slip in the panels. The valance returns attach to joiners but you may have to trip excess fabric. Woven wooden valances come with an aluminium L joint in the corner that inserts into the panel. The last step is to install the cords which move the panels along the track.
Always be sure to avoid abrasive cleaners such as cleansers and products containing bleach as they can affect the vinyl surface or the caulking around the window. Also avoid using a power washer or hard spraying hose as this too can damage the caulk. Besides occasional exterior cleaning the tracks and runners on your vinyl sliders should be checked every few weeks to make sure they are clear of debris. Vinyl sliding windows glide horizontally and open the full length of the window.
Remove The Windows. You can easily remove the windows by sliding it open past the lift blocks and then placing your hands on either side of the window and lifting it out of its track. You can then remove the window towards you. Do the same with the other window and place them in a safe area. Proceed With The Washing. Wash them using a window cleaning solution and a nonlint cloth. Make sure to thoroughly clean the glass and remove any stains that you will find. Start from the upper left corner of your window glass and proceed downward using an Sshaped motion for wiping the window.