Awning Windows / October 25, 2018 / Christabel Gosselin.
Casement Windows. Open all the way outward hence allow maximum light and air. Energy efficient because they shut tight. Can be glazed to save energy. Easy to use as a simple crank mechanism is used. Disabled people can operate them easily. Cleaning is easy therefore ideal for installing behind sinks and countertops. Allows for quick and easy emergency escapes. Greater aesthetic customization lend themselves to a variety of designs colors and materials. Use mechanical parts that need maintenance
Window grills provide very good security and ventilation. Windows can be left open even if you are not home. Window grills are relatively expensive so best fitted in bedrooms bathrooms kitchens or areas requiring good ventilation. If a window lock is correctly installed the glass would need to be broken or a considerable amount of force used to get the window open. Windows are a major part of ones home a feature which not only determines the look of the house but also gives it a special identity. Windows are a crucial ingredient that gives your home its special identity.
Casement windows are attached vertically with hinges to one side on a wall. They usually open with a crank mechanism. A single window or a pair of windows can be fitted into a frame. They open all the way outward and are wide open from top to bottom and sidetoside. A sliding window is a window that slides along a track inside the window frame. The frame may consist of many tracks depending on the number of windows on the tracks. They open horizontally and give a hundred percent view of the outside.
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.