Awning Windows / August 6, 2018 / Guillaume Roussel
Sliding window locks are often called vent locks as they allow the window to be locked slightly open for ventilation. The recommended gap is 100mm but never have more than 150mm. The theory is that if a head can get through a window a person can squeeze through. The venting position is not as secure as when the window is shut and locked. Therefore you should only leave your windows locked open you are at home.
To save on energy one can choose a doubleglazed window (which uses two panels of glass). The layer between the two glasses acts as an insulator to save the heat in the room. Depending on how much privacy and safety is required in the area where you live you may opt for fortified or screened windows. But above all its your budget that will have a final say on how your windows will look. There are benefits and drawbacks of each kind of window. Lets look at some of them:
You will have to choose a window with an electrical socket nearby in order to connect the air conditioner unitproperly. Remove any furniture or obstacles near the window which could impede air flow. You must thoroughly check the window sill to see if it will act as a stable base for air conditioner unit. You will have to replace it if it is cracked or corrupt before you proceed with installation of the unit. Now install the metal brackets use to support the AC at a level which is set for it. These brackets need to be nailed at the center.