Sliding Window / July 18, 2018 / Marguerite Mathieu
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.
Depending on the window treatments you chose you have the opportunity to enjoy an unobstructed view of the outdoors and maximize the potential for allowing fresh air ina great energysaving benefit during the warmer months when a subtle breeze can save you from constantly running your air conditioning. These windows are also space savers because they slide rather than crank out. You can be sure that a vinyl sliding window will not interfere with an outdoor deck patio or walkway and they wont interfere with or open into your landscaping.
You will have to choose a window with an electrical socket nearby in order to connect the air conditioner unitproperly. Remove any furniture or obstacles near the window which could impede air flow. You must thoroughly check the window sill to see if it will act as a stable base for air conditioner unit. You will have to replace it if it is cracked or corrupt before you proceed with installation of the unit. Now install the metal brackets use to support the AC at a level which is set for it. These brackets need to be nailed at the center.