Awning Windows / August 4, 2018 / Burrell Lebel
Especially good for covering patio doors these window coverings preserve an outdoors look. Some interior decorators also use them as attractive room dividers. The dramatic size of these wall to wall floor to floor window coverings creates a striking image. To install these window coverings you need some kind of track to hold the window frame. Unlike wood blinds where the window and blinds are separate in sliding panels they are the same. Some have tracking on the top and bottom while some only have it on one side.
Remove The Windows. You can easily remove the windows by sliding it open past the lift blocks and then placing your hands on either side of the window and lifting it out of its track. You can then remove the window towards you. Do the same with the other window and place them in a safe area. Proceed With The Washing. Wash them using a window cleaning solution and a nonlint cloth. Make sure to thoroughly clean the glass and remove any stains that you will find. Start from the upper left corner of your window glass and proceed downward using an Sshaped motion for wiping the window.
You then use a dry non lint cloth or those absorbable cloth used in cleaning cars to dry your window. Dont forget to also clean the track where the window is and the area around it. Place Your Windows Back. After the cleaning and drying is done you need to put them back together. Put your windows back following a reverse order of how you removed them. You need to make sure that the sliding windows are reinstalled securely and there will be no chances of them being accidentally removed.