Sliding Window / November 13, 2018 / Marc Girard.
To install sliding window locks you need the following tools: Sliding windows can be lifted to varying degrees within their track. If you are using the venting position it is a good idea to fit something in the track to stop the window from being lifted. Small blocks of wood or plastic or just a screw can be used. If fitted correctly this can make the window a lot more secure especially when locking the window in the open position.
To save on energy one can choose a doubleglazed window (which uses two panels of glass). The layer between the two glasses acts as an insulator to save the heat in the room. Depending on how much privacy and safety is required in the area where you live you may opt for fortified or screened windows. But above all its your budget that will have a final say on how your windows will look. There are benefits and drawbacks of each kind of window. Lets look at some of them:
Always be sure to avoid abrasive cleaners such as cleansers and products containing bleach as they can affect the vinyl surface or the caulking around the window. Also avoid using a power washer or hard spraying hose as this too can damage the caulk. Besides occasional exterior cleaning the tracks and runners on your vinyl sliders should be checked every few weeks to make sure they are clear of debris. Vinyl sliding windows glide horizontally and open the full length of the window.
The kitchen sliding windows are made of two sashes that can slide horizontally over each other. There is a track that allows the left and right movement of the windows. You can add more that two sashes to make your windows taller and wider. Since the track that is made for sliding of the sashes is little above the ground it doesnt allow the dust to settle on it. This way it becomes easier to maintain the windows and dust will never jam the working of the windows thus increasing its life.