Sliding Window / July 25, 2018 / Marguerite Mathieu
To install the track you need a secure surface to mount it too. Make sure your blinds came with all the parts you will need like bracket screw mountings for wood installation. Some paper windows come with a swivel bracket so they can be opened horizontally and pivoted open. You need a minimum distance between the swivel and the walls to allow the doors to open. The number of tracks roughly equates to how solid the window covering will be.
You then use a dry non lint cloth or those absorbable cloth used in cleaning cars to dry your window. Dont forget to also clean the track where the window is and the area around it. Place Your Windows Back. After the cleaning and drying is done you need to put them back together. Put your windows back following a reverse order of how you removed them. You need to make sure that the sliding windows are reinstalled securely and there will be no chances of them being accidentally removed.
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.