Sliding Window / July 25, 2018 / Marguerite Mathieu
You then use a dry non lint cloth or those absorbable cloth used in cleaning cars to dry your window. Dont forget to also clean the track where the window is and the area around it. Place Your Windows Back. After the cleaning and drying is done you need to put them back together. Put your windows back following a reverse order of how you removed them. You need to make sure that the sliding windows are reinstalled securely and there will be no chances of them being accidentally removed.
The kitchen sliding windows are made of two sashes that can slide horizontally over each other. There is a track that allows the left and right movement of the windows. You can add more that two sashes to make your windows taller and wider. Since the track that is made for sliding of the sashes is little above the ground it doesnt allow the dust to settle on it. This way it becomes easier to maintain the windows and dust will never jam the working of the windows thus increasing its life.
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.