Sliding Window / July 23, 2018 / Guillaume Roussel
Sliding window locks are often called vent locks as they allow the window to be locked slightly open for ventilation. The recommended gap is 100mm but never have more than 150mm. The theory is that if a head can get through a window a person can squeeze through. The venting position is not as secure as when the window is shut and locked. Therefore you should only leave your windows locked open you are at home.
Depending on the window treatments you chose you have the opportunity to enjoy an unobstructed view of the outdoors and maximize the potential for allowing fresh air ina great energysaving benefit during the warmer months when a subtle breeze can save you from constantly running your air conditioning. These windows are also space savers because they slide rather than crank out. You can be sure that a vinyl sliding window will not interfere with an outdoor deck patio or walkway and they wont interfere with or open into your landscaping.
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.