Awning Windows / August 2, 2018 / Olympia Doucet
Primarily it may be the environment that affects the choice of windows. A harsh environment calls for windows that are inside the house rather than exposed to the sun wind and temperature shifts whereas a mild environment allows the use of windows that are exposed to the outside. Ventilation is another important point to be considered while choosing windows. Windows fitted on opposite walls allow for cross ventilation and help keep the rooms cool.
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.
Next you need to install the head rail. Just like the lower track the pivot brackets must be a few inches from the wall. Sometimes you may need more than one track to cover a room. This also allows the window panels to be stacked upon each other. If you want to add an additional valance to the mix make sure you use one that is deigned for that window panel. Otherwise it will not fit correctly.