Sliding Window / July 15, 2018 / Burrell Lebel
Always be sure to avoid abrasive cleaners such as cleansers and products containing bleach as they can affect the vinyl surface or the caulking around the window. Also avoid using a power washer or hard spraying hose as this too can damage the caulk. Besides occasional exterior cleaning the tracks and runners on your vinyl sliders should be checked every few weeks to make sure they are clear of debris. Vinyl sliding windows glide horizontally and open the full length of the window.
To install sliding window locks you need the following tools: Sliding windows can be lifted to varying degrees within their track. If you are using the venting position it is a good idea to fit something in the track to stop the window from being lifted. Small blocks of wood or plastic or just a screw can be used. If fitted correctly this can make the window a lot more secure especially when locking the window in the open position.
Sliding window locks are often called vent locks as they allow the window to be locked slightly open for ventilation. The recommended gap is 100mm but never have more than 150mm. The theory is that if a head can get through a window a person can squeeze through. The venting position is not as secure as when the window is shut and locked. Therefore you should only leave your windows locked open you are at home.