Sliding Window / July 15, 2018 / Burrell Lebel
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.
The sliding window air conditioners are mainly used in the small apartments. These consume much less electricity as compared to the other units. These are the best options for achieving cooling in a small area having one or two rooms. You have a freedom on installing individual units in each rooms thus providing opportunity to individuals occupying that room to adjust temperature as per their preferences.
You will then need to install the panels into the rails. This can be hard because they are designed to not fall out. There may be Velcro strips you can install on the inside of the head rail to secure the windows. This should also let you slip in the panels. The valance returns attach to joiners but you may have to trip excess fabric. Woven wooden valances come with an aluminium L joint in the corner that inserts into the panel. The last step is to install the cords which move the panels along the track.