Sliding Window / July 24, 2018 / Marc Girard
Next you need to install the head rail. Just like the lower track the pivot brackets must be a few inches from the wall. Sometimes you may need more than one track to cover a room. This also allows the window panels to be stacked upon each other. If you want to add an additional valance to the mix make sure you use one that is deigned for that window panel. Otherwise it will not fit correctly.
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.
The kitchen sliding windows are made of two sashes that can slide horizontally over each other. There is a track that allows the left and right movement of the windows. You can add more that two sashes to make your windows taller and wider. Since the track that is made for sliding of the sashes is little above the ground it doesnt allow the dust to settle on it. This way it becomes easier to maintain the windows and dust will never jam the working of the windows thus increasing its life.