Sliding Window / July 17, 2018 / Marc Girard
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.
You will have to choose a window with an electrical socket nearby in order to connect the air conditioner unitproperly. Remove any furniture or obstacles near the window which could impede air flow. You must thoroughly check the window sill to see if it will act as a stable base for air conditioner unit. You will have to replace it if it is cracked or corrupt before you proceed with installation of the unit. Now install the metal brackets use to support the AC at a level which is set for it. These brackets need to be nailed at the center.
The sliding door is generally available in glass which allows light to enter your home. They can be used as a partition between two rooms or can also be used to connect to your patio or garden. The sliding windows are available in glass as well. Different kinds of frames are available for these but it is best to opt for the U PVC frames. They are durable ECO friendly and are easy to maintain as well. Sliding frames are generally used in areas that have large open space. They are apt for places that can accommodate 23 panels easily.