Awning Windows / August 1, 2018 / Marguerite Mathieu
People usually think that the air conditioner installation needs some great expertise but in reality it is much easy more so in the case of sliding ACs. Precautions. The window ACs are bulky so you should lift them firmly but carefully without exerting any pressure on its cooling parts which could cause you injury. Materials and few tools you may need during the installation of air conditioner: A screwdriver A support arc A level Few Wood screws Some foam weather stripping.
You then use a dry non lint cloth or those absorbable cloth used in cleaning cars to dry your window. Dont forget to also clean the track where the window is and the area around it. Place Your Windows Back. After the cleaning and drying is done you need to put them back together. Put your windows back following a reverse order of how you removed them. You need to make sure that the sliding windows are reinstalled securely and there will be no chances of them being accidentally removed.
You will have to choose a window with an electrical socket nearby in order to connect the air conditioner unitproperly. Remove any furniture or obstacles near the window which could impede air flow. You must thoroughly check the window sill to see if it will act as a stable base for air conditioner unit. You will have to replace it if it is cracked or corrupt before you proceed with installation of the unit. Now install the metal brackets use to support the AC at a level which is set for it. These brackets need to be nailed at the center.