Sliding Window / July 26, 2018 / Olympia Doucet
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.
To install the track you need a secure surface to mount it too. Make sure your blinds came with all the parts you will need like bracket screw mountings for wood installation. Some paper windows come with a swivel bracket so they can be opened horizontally and pivoted open. You need a minimum distance between the swivel and the walls to allow the doors to open. The number of tracks roughly equates to how solid the window covering will be.
You will have to choose a window with an electrical socket nearby in order to connect the air conditioner unitproperly. Remove any furniture or obstacles near the window which could impede air flow. You must thoroughly check the window sill to see if it will act as a stable base for air conditioner unit. You will have to replace it if it is cracked or corrupt before you proceed with installation of the unit. Now install the metal brackets use to support the AC at a level which is set for it. These brackets need to be nailed at the center.