Sliding Window / July 28, 2018 / Burrell Lebel
To install sliding window locks you need the following tools: Sliding windows can be lifted to varying degrees within their track. If you are using the venting position it is a good idea to fit something in the track to stop the window from being lifted. Small blocks of wood or plastic or just a screw can be used. If fitted correctly this can make the window a lot more secure especially when locking the window in the open position.
Depending on the window treatments you chose you have the opportunity to enjoy an unobstructed view of the outdoors and maximize the potential for allowing fresh air ina great energysaving benefit during the warmer months when a subtle breeze can save you from constantly running your air conditioning. These windows are also space savers because they slide rather than crank out. You can be sure that a vinyl sliding window will not interfere with an outdoor deck patio or walkway and they wont interfere with or open into your landscaping.
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.