Sliding Window / July 14, 2018 / Tearlach DuLin
You will then need to install the panels into the rails. This can be hard because they are designed to not fall out. There may be Velcro strips you can install on the inside of the head rail to secure the windows. This should also let you slip in the panels. The valance returns attach to joiners but you may have to trip excess fabric. Woven wooden valances come with an aluminium L joint in the corner that inserts into the panel. The last step is to install the cords which move the panels along the track.
Remove The Windows. You can easily remove the windows by sliding it open past the lift blocks and then placing your hands on either side of the window and lifting it out of its track. You can then remove the window towards you. Do the same with the other window and place them in a safe area. Proceed With The Washing. Wash them using a window cleaning solution and a nonlint cloth. Make sure to thoroughly clean the glass and remove any stains that you will find. Start from the upper left corner of your window glass and proceed downward using an Sshaped motion for wiping the window.
Next you need to install the head rail. Just like the lower track the pivot brackets must be a few inches from the wall. Sometimes you may need more than one track to cover a room. This also allows the window panels to be stacked upon each other. If you want to add an additional valance to the mix make sure you use one that is deigned for that window panel. Otherwise it will not fit correctly.