Sliding Window / July 24, 2018 / Marc Girard
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.
The sliding window air conditioners are mainly used in the small apartments. These consume much less electricity as compared to the other units. These are the best options for achieving cooling in a small area having one or two rooms. You have a freedom on installing individual units in each rooms thus providing opportunity to individuals occupying that room to adjust temperature as per their preferences.
To install sliding window locks you need the following tools: Sliding windows can be lifted to varying degrees within their track. If you are using the venting position it is a good idea to fit something in the track to stop the window from being lifted. Small blocks of wood or plastic or just a screw can be used. If fitted correctly this can make the window a lot more secure especially when locking the window in the open position.