Sliding Window / July 16, 2018 / Guillaume Roussel
Remove The Windows. You can easily remove the windows by sliding it open past the lift blocks and then placing your hands on either side of the window and lifting it out of its track. You can then remove the window towards you. Do the same with the other window and place them in a safe area. Proceed With The Washing. Wash them using a window cleaning solution and a nonlint cloth. Make sure to thoroughly clean the glass and remove any stains that you will find. Start from the upper left corner of your window glass and proceed downward using an Sshaped motion for wiping the window.
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.
The sliding door is generally available in glass which allows light to enter your home. They can be used as a partition between two rooms or can also be used to connect to your patio or garden. The sliding windows are available in glass as well. Different kinds of frames are available for these but it is best to opt for the U PVC frames. They are durable ECO friendly and are easy to maintain as well. Sliding frames are generally used in areas that have large open space. They are apt for places that can accommodate 23 panels easily.