Awning Windows / August 1, 2018 / Marguerite Mathieu
Casement windows are attached vertically with hinges to one side on a wall. They usually open with a crank mechanism. A single window or a pair of windows can be fitted into a frame. They open all the way outward and are wide open from top to bottom and sidetoside. A sliding window is a window that slides along a track inside the window frame. The frame may consist of many tracks depending on the number of windows on the tracks. They open horizontally and give a hundred percent view of the outside.
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.
Next you need to install the head rail. Just like the lower track the pivot brackets must be a few inches from the wall. Sometimes you may need more than one track to cover a room. This also allows the window panels to be stacked upon each other. If you want to add an additional valance to the mix make sure you use one that is deigned for that window panel. Otherwise it will not fit correctly.