Awning Windows / August 5, 2018 / Christabel Gosselin
You will have to choose a window with an electrical socket nearby in order to connect the air conditioner unitproperly. Remove any furniture or obstacles near the window which could impede air flow. You must thoroughly check the window sill to see if it will act as a stable base for air conditioner unit. You will have to replace it if it is cracked or corrupt before you proceed with installation of the unit. Now install the metal brackets use to support the AC at a level which is set for it. These brackets need to be nailed at the center.
People have now started opting for sliding door also and especially when they have a good patio and garden. It makes the home look spacious and helps you enjoy a beautiful view outside. In case you are at the patio then you can still know whats going inside your home. The sliding door can also be used inside your home as a partition or to convert two rooms into one. Many people use this kind of door to distinguish their dining room from the living room. When you throw a party you can open the door so that the guests can feel comfortable and dont feel crammed together.
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.