Sliding Window / November 17, 2018 / Christabel Gosselin.
To install sliding window locks you need the following tools: Sliding windows can be lifted to varying degrees within their track. If you are using the venting position it is a good idea to fit something in the track to stop the window from being lifted. Small blocks of wood or plastic or just a screw can be used. If fitted correctly this can make the window a lot more secure especially when locking the window in the open position.
To save on energy one can choose a doubleglazed window (which uses two panels of glass). The layer between the two glasses acts as an insulator to save the heat in the room. Depending on how much privacy and safety is required in the area where you live you may opt for fortified or screened windows. But above all its your budget that will have a final say on how your windows will look. There are benefits and drawbacks of each kind of window. Lets look at some of them:
Next you need to install the head rail. Just like the lower track the pivot brackets must be a few inches from the wall. Sometimes you may need more than one track to cover a room. This also allows the window panels to be stacked upon each other. If you want to add an additional valance to the mix make sure you use one that is deigned for that window panel. Otherwise it will not fit correctly.
People usually think that the air conditioner installation needs some great expertise but in reality it is much easy more so in the case of sliding ACs. Precautions. The window ACs are bulky so you should lift them firmly but carefully without exerting any pressure on its cooling parts which could cause you injury. Materials and few tools you may need during the installation of air conditioner: A screwdriver A support arc A level Few Wood screws Some foam weather stripping.