Sliding Window / November 12, 2018 / Marguerite Mathieu.
Remove The Windows. You can easily remove the windows by sliding it open past the lift blocks and then placing your hands on either side of the window and lifting it out of its track. You can then remove the window towards you. Do the same with the other window and place them in a safe area. Proceed With The Washing. Wash them using a window cleaning solution and a nonlint cloth. Make sure to thoroughly clean the glass and remove any stains that you will find. Start from the upper left corner of your window glass and proceed downward using an Sshaped motion for wiping the window.
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.
When one buys or rents a home a renovation of the house is sometimes called for and you might need to choose window types from the vast repertoire of available choices. A number of aspects need to be considered while planning a replacement of old windows or while choosing windows for your new home. The most important factors to keep in mind while choosing the window types are: ventilation beauty safety energy efficiency the environment and of course the cost. The most commonly used window types are casement and sliding windows.
People usually think that the air conditioner installation needs some great expertise but in reality it is much easy more so in the case of sliding ACs. Precautions. The window ACs are bulky so you should lift them firmly but carefully without exerting any pressure on its cooling parts which could cause you injury. Materials and few tools you may need during the installation of air conditioner: A screwdriver A support arc A level Few Wood screws Some foam weather stripping.