Sliding Window / July 14, 2018 / Tearlach DuLin
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.
To install the track you need a secure surface to mount it too. Make sure your blinds came with all the parts you will need like bracket screw mountings for wood installation. Some paper windows come with a swivel bracket so they can be opened horizontally and pivoted open. You need a minimum distance between the swivel and the walls to allow the doors to open. The number of tracks roughly equates to how solid the window covering will be.
Many new sliding windows have key locking latches already installed. Some allow the window to be locked slightly open for ventilation. If your home has these window locks they are usually secure enough to keep your insurance company happy. If your home has only a simple nonlocking latch you should secure them with a keylocking sliding window lock or a window grill. Installing window locks yourself will cost AUD$15$20 per window. Having these locks supplied and installed by a locksmith will cost $40$50 per window.