Sliding Window / July 24, 2018 / Marc Girard
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.
You then use a dry non lint cloth or those absorbable cloth used in cleaning cars to dry your window. Dont forget to also clean the track where the window is and the area around it. Place Your Windows Back. After the cleaning and drying is done you need to put them back together. Put your windows back following a reverse order of how you removed them. You need to make sure that the sliding windows are reinstalled securely and there will be no chances of them being accidentally removed.
When one buys or rents a home a renovation of the house is sometimes called for and you might need to choose window types from the vast repertoire of available choices. A number of aspects need to be considered while planning a replacement of old windows or while choosing windows for your new home. The most important factors to keep in mind while choosing the window types are: ventilation beauty safety energy efficiency the environment and of course the cost. The most commonly used window types are casement and sliding windows.