Sliding Window / July 30, 2018 / Guillaume Roussel
Remove The Windows. You can easily remove the windows by sliding it open past the lift blocks and then placing your hands on either side of the window and lifting it out of its track. You can then remove the window towards you. Do the same with the other window and place them in a safe area. Proceed With The Washing. Wash them using a window cleaning solution and a nonlint cloth. Make sure to thoroughly clean the glass and remove any stains that you will find. Start from the upper left corner of your window glass and proceed downward using an Sshaped motion for wiping the window.
Depending on the window treatments you chose you have the opportunity to enjoy an unobstructed view of the outdoors and maximize the potential for allowing fresh air ina great energysaving benefit during the warmer months when a subtle breeze can save you from constantly running your air conditioning. These windows are also space savers because they slide rather than crank out. You can be sure that a vinyl sliding window will not interfere with an outdoor deck patio or walkway and they wont interfere with or open into your landscaping.
Next you need to install the head rail. Just like the lower track the pivot brackets must be a few inches from the wall. Sometimes you may need more than one track to cover a room. This also allows the window panels to be stacked upon each other. If you want to add an additional valance to the mix make sure you use one that is deigned for that window panel. Otherwise it will not fit correctly.