Sliding Window / October 30, 2018 / Christabel Gosselin.
Remove The Windows. You can easily remove the windows by sliding it open past the lift blocks and then placing your hands on either side of the window and lifting it out of its track. You can then remove the window towards you. Do the same with the other window and place them in a safe area. Proceed With The Washing. Wash them using a window cleaning solution and a nonlint cloth. Make sure to thoroughly clean the glass and remove any stains that you will find. Start from the upper left corner of your window glass and proceed downward using an Sshaped motion for wiping the window.
People have now started opting for sliding door also and especially when they have a good patio and garden. It makes the home look spacious and helps you enjoy a beautiful view outside. In case you are at the patio then you can still know whats going inside your home. The sliding door can also be used inside your home as a partition or to convert two rooms into one. Many people use this kind of door to distinguish their dining room from the living room. When you throw a party you can open the door so that the guests can feel comfortable and dont feel crammed together.
The kitchen sliding windows are made of two sashes that can slide horizontally over each other. There is a track that allows the left and right movement of the windows. You can add more that two sashes to make your windows taller and wider. Since the track that is made for sliding of the sashes is little above the ground it doesnt allow the dust to settle on it. This way it becomes easier to maintain the windows and dust will never jam the working of the windows thus increasing its life.
You will then need to install the panels into the rails. This can be hard because they are designed to not fall out. There may be Velcro strips you can install on the inside of the head rail to secure the windows. This should also let you slip in the panels. The valance returns attach to joiners but you may have to trip excess fabric. Woven wooden valances come with an aluminium L joint in the corner that inserts into the panel. The last step is to install the cords which move the panels along the track.